Sensonor 新推出STIM210 超高性能多轴陀螺模组
来源:sensonor
|
作者:spacelt
|
发布时间: 2016-03-03
|
4805 次浏览
|
分享到:
Sensonor STIM210 超高性能多轴陀螺模组
STIM210是一款小巧、价格适中、在恶劣环境下仍能可靠工作的高性能硅基MEMS陀螺模组，最多可容纳3轴。它不受国际武器贸易协定(ITAR)约束，非常适用于工业、航天及国防领域的平台稳定系统、导航与控制等应用。它重量轻(52g)、启动时间短、全温范围零偏低等优异性能为MEMS陀螺模组树立了行业标杆。 模组出厂前经过校准并在全工作温度范围内进行温度补偿，它的零偏不稳定性为0.5°/h，ARW小于0.15°/√h，支持外触发输入、数据时间戳和高达 2kHz的采样率。全工作温度范围内的零偏稳定性为10°/h。系统设计者会毫不犹豫地选择STIM210来替代大且昂贵、脆弱且易磨损的现用光纤陀螺仪(FOG)、石英或其它机械陀螺传感器
Description
STIM210 is a small, tactical grade, affordable, robust and reliable, ultra high performance (Bias Stability 0.5°/h, ARW 0.15°/√h) MEMS gyro module with up to 3 axes. An integrated 32-bit microcontroller enables flexible user configuration. Electronic axis alignment is standard.
Looking for an IMU? Check out STIM300
Application areas
Navigation
Stabilization
Industrial
Agriculture
Aerospace
Maritime
Subsea
Defense
Key features
Miniature package
ITAR free
Excellent performance in vibration and shock
Excellent environmental robustness
1, 2 or 3 axes offered in same package
Electronically calibrated axis alignment
Plug & play high-level RS422 interface
24 bits resolution
Single-crystal silicon technology
Low bias drift
Low noise
Fully configurable:
- 5 different sampling rates available
- 5 different bandwidths available
- LP filter -3dB frequency can be set individually for each axis
- RS422 protocol, bit rate and line termination
- Selectable output unit: angular rate [deg/s] or incremental angle [deg]
Continuous self-diagnostics
